Name
Dr. Anjali J. Joshi
Position
Head of the Department, Associate Professor
Department
Mechanical Engineering
Email id
hod_mechanical@mmit.edu.in,
anjali.joshi@mmit.edu.in
Cell No
9850826636
Extension No
401
Qualifications
PhD (Machine Design) RTM, Nagpur University
Experience
Teaching experience- 20 Years
Research experience- 6 Years
Research Areas
Kinematics of Machines
Publications
1.Deep learning model to detect deceptive generative adversarial network generated images using multimedia forensic.
2.Optimizing energy and latency trade-offs in mobile ultra-dense IoT networks within futuristic smart vertical networks
3.Fusion-Based Representation Learning Model for Multimode User-Generated Social Network Content
4.Spatio–temporal attention based real‐time environmental monitoring systems for landslide monitoring and prediction
5. Anjali J. Joshi, Mr. Pulkit Sone , Mr. Suyash Udare Graduate Student, “Force Analysis of 2- Wheeler Swingarm Using Ansys Workbench”, Journal of Automobile Engineering and Applications STM Journals ISSN: 2455-3360 Vol. 6 Issue 01, June-2019
6.Anjali J. Joshi, Mr. Pulkit Sone , Mr. Shreyas Bhadane Graduate Student, “Design & Development of Car Door Hinge and Disassemble System”, International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181 Vol. 6 Issue 04, April- 2017
7.Anjali J. Joshi, “Formulation and Optimization of Mathematical Model of Fabrication Time of A Stone Crushing Plant-Based on Dimensional Analysis And Multiple Regression Analysis Including Sensitivity Analysis”, International Conference on “Advanced Technologies for Societal Applications” Organized by College of Engineering Pandharpur. Dec 2016
8.Anjali J. Joshi, Dr. Jayant P. Modak, “Design and Development of a small capacity stone crusher mechanism”, Indian Journal of Applied Research, Volume: 3, Issue: 2 February 2013, ISSN - 2249-555X
9.Anjali J. Joshi, Dr. Jayant P. Modak, “A Generalized Approach for Kinematic Synthesis and Analysis of Alternate Mechanism for Stone Crusher Using Relative Velocity Method”,International Journal of Engineering Research and Application, Volume 3,Issue 2 March– April 2013 p.p189-194,ISSN-2248-962
10.Anjali J. Joshi, Dr. Jayant P. Modak, “Kinematic Synthesis and Analysis of Alternate Mechanism for Stone Crusher Using Relative Velocity Method,” International journal of Scientific Research, Volume 2 ,Issue 3:March 2013,ISSN-2277-8179
11.Anjali J. Joshi, Dr. Jayant P. Modak, “Design and development of a Alternate Mechanism for Stone Crusher Using Relative Velocity Method”, International Journal of Advance Research in Mechanical Engineering, ISSN: 2231 –5950, Volume 3, Issue 2, 2013
12.Anjali J. Joshi, Dr. Jayant P. Modak, “ Formulation of Mathematical Model for Maintenance Cost of a Stone Crushing Plant Based on Dimensional Analysis and Multiple Regression”,International Journal of Mechanical &industrial Engineering, ISSN No. 2231 –6477, Volume-3, Issue-2, 2013
FDP/Workshop
1. AICTE Sponsored ATAL Academy Online FDP on “Emotional Intelligence” from 2020-9-13 to 2020-9-17 at Indian Institute of Information Technology, Allahabad.
2.One Day Online Webinar Sponsored by NBA on to Webinar Date : 27th November 2020, Time: 9.00am-2.00PmAwareness Webinar on Outcome Based Education and Accreditation
3.AICTE Sponsored Training And Learning (ATAL) Academy Online FDP on "Design Thinking" from 2020-10-19 to 2020-10-23 at KPR Institute of Engineering and Technology
Awards & Recognitions
1. Ph.D Reviewer of RTM Nagpur University
2. Recognised in Panel member of Interview committee under SPPU for the post of Associate Professor
3. SUCR Cutting Machine -Smart Underground Crop root Cutter Machine – Application Number:201921009961 Filing Date:14/03/2019 Status: Published
4. II Parking System – Intelligent Independent Parking System – Application Number:201921016528 Filing Date:17/05/2019 Status: Published
5. ICM-Cleaning :Intelligent car cleaning- Application Number:202021003508 Filing Date:27/01/2020 Status: Published
6. Solar Energy Based Purification of Sea Water Using Distillation and UV Process-Application Number:10/02/2020 Status:Published
7.AAA Auditor for Ayinkya D.Y.Patil Lohagaon Pune.
Industry Connect
ELCA Quality Systems and Calibrations Pvt.Ltd.,
Technowings Automation India Pvt.Ltd
Funded Projects
-
Professional Affiliations
ISTE Professional Membership
Responsibilities @MMIT
IQAC Coordinator
Dr. Girish L. Allampallewar
Associate Professor
girish.allampallewar@mmit.edu.in
9765480244
503
Ph.D. (Mechanical)
Teaching experience-
Academic Experience- 13.5 yrs.
Industry Experience- 6.5 yrs.
Research experience- 0.5 years
Solar Cells, FEA, Automobiles
1. Vijay W. Bhatkar, Girish L. Allampallewar, and Vivek N. Deshmukh , “Thermal and Mechanical Design of Superheater for Process Industries”, Energy Environ. Focus 2023, Vol. 7, No. xx, 1555-130X/2023/7/001/005
2. Prof. Ritesh G.Mahajan, Dr. Girish Allampallewar, Mr. Sudarshan Dhage, Mr.Rohit Patil, Ms.Shivani Shinde , “Development of Electropneumatic Stamping Machine”, Mukt Shabd Journal, Volume XII, Issue IX, SEPTEMBER/2023, Page 191-199, ISSN NO : 2347-3150
3. Mane Sudarshan Rajendra, Shimpi Akshay Rajesh, Adagale Akash Malhari, Belhekar Akshay Baban, Dr. Girish Allampallewar, “Solar Powered Hybrid Vehicle”, International Virtual Conference on Emerging Trends in Engineering and Management Sciences (ICETEMS-21), July 2021, ISBN: 979-8-5412-2027-8
4. Sumitra Athare,. Aniket barotkar, Bhushan Bhingare,. Devraj Kale, Dr. G. L. Allampallewar, “Design and Manufacturing of Loop Wheel Bicycle with Damper”, International Virtual Conference on Emerging Trends in Engineering and Management Sciences (ICETEMS-21), July 2021, ISBN: 979-8-5412-2027-8
5. Sukte Sandip Prakash, Yadav Ajay Jagannath, Pillay Sushil Govardhan, Kardile Rishabh Madhukar, Dr. Girish Allampallewar, “Design of Automatic Contactless Sanitization Unit”, International Virtual Conference on Emerging Trends in Engineering and Management Sciences (ICETEMS-21), July 2021, ISBN: 979-8-5412-2027-8
6. Mr. G. L. Allampallewar, Dr S. B. Thakre, “Experimental investigation of SiO2 coating on the performance of Solar Panel”, Test Journal (Mattingley Publishing Co Inc.), Feb. 2020, Vol. 82, 8389-8394
7. Mr. G. L. Allampallewar, Dr S. B. Thakre, “A Review on ways to improve performance of solar panels”, International Journal of Innovative Research in Science, Engineering and Technology, June 2016
8. Girish L. Allampallewar, Pushkar Pawar, Pooja Gade , “Cell Phone Operated Stair Climbing SPY Robot”, International Journal of Current Engineering and Technology , E- ISSN 2277 – 4106, P-ISSN 2347 – 5161
9. G. L. Allampallewar, Martand Pandagale, Saurabh Bhand, Sumesh Pillai, Vikas Shinde, Shubham Baviskar , “Static Analysis of ATV Roll Cage”, International Journal of Current Engineering and Technology, E-ISSN 2277 – 4106, P-ISSN 2347 – 5161
10. Abhijeet Jagtap, Swati Kulkarni, YashNaik, AbhijeetJadhav and Prof. G. L. Allampallewar, “Design and development of a two stage gear box for an All-Terrain Vehicle” IJMPRE ISSN 2349-3534,Vol VII, Issue VI, June 2018
11. G.L. Allampallewar, Divyal P. Bagul, Abhiraj S. Galande, Amol M. Rathod, Ketan R. Behere, “Improvement in Heat Transfer Rate and Dynamics of Shrouded Fanned Radiator System”, International Conference on Ideas, Impact and Innovation in Mechanical Engineering (ICIIIME 2017), Volume: 5 Issue: 6, ISSN: 2321-8169; 1213 – 1219
12. Girish L. Allampallewar, Vishal S. Shitole, “Comparative Finite Element Analysis Of Gas Turbine Blade For Super Alloy And Composite Material”, International Conference on Design, Manufacturing and Mechatronics ICDMM2015, ICDMM2015-073, February 2015, Page no. 277-282
1. Attended one day workshop on ‘Implementation and Scope of Turbo machinery’ organized by SITS, Lonavala on 22/11/2010
2. Attended Workshop on Syllabus Implementation of CAD/CAM & Automation (BE 2008 Pattern)
3. Attended Workshop on Syllabus Implementation of Engineering Graphics-I (FE 2012 Pattern)
4. Attended Workshop on Syllabus Implementation of Basic Mechanical Engineering (FE 2012 Pattern)
5. 3 Days orientation program on CATIA-V6 organized by 3D-PLM in association with University of Pune during 26-28 Dec 2011
6. Attended two day workshop on Computational Fluid Dynamics at MAE, Alandi during 30-31 March 2012
7. Attended Workshop on MasterCAM organized by MIT CoE, Pune during 02-03 Aug 2012
8. Attended Orientation program on MATLAB R-13 organized by MMIT, Pune
9. Attended workshop on Revised Syllabus Implementation of Computer Aided Machine Drawing (SE-2012 Pat.) on 25/06/2013
10. Attended Workshop on ‘Research Methodology ’ organized by MMIT, Pune during 29-30th April 2014
11. Organized and Attended 5 Day workshop on ‘Vehicle and Automobile Dynamics’ in association with Elite Techno Groups during 24th to 28th August 2014
12. Attended one day workshop on Syllabus restructuring for Reliability Engineering (BE-2012 Pat.) 08/04/2015
13. Attended Faculty Development Program organized by SAEINDIA at DIEMS, Aurangabad on 27/06/2015
14. Attended two day workshop on Industrial Projects held on 3-4 may 2017 at MMCOE
15. Organized 3 days workshop on CATIA V6 in association with EDS Technologies 5th to 7 th July 2021
16. Co-convenor for Two Days Quality Improvement Programme in Implementation of National Education Policy 2020, 7th to 8th Feb 2023
1. Awarded as Best Faculty Advisor by ATVC 2023 held at Talegaon during May 2023
2. Achieved Guru Mentor Award in Nirman Gokart Championship-2016
3. Appointed as Member of Advisory Committee for Auto India Racing Chanmpionship-2018
1. Sude Engineering
2. Bellatore Engineers Pvt Ltd
Active member of SESI
· Lifetime Member, International Society for Research and Development (ISRD).
· Member, International Association of Engineers (IAENG).
Dean Administration,
NIRF Nodal Officer,
CAD Lab In charge,
Chief Faculty Advisor (MMIT Automotive Club),
NAAC Cr1 Coordinator,
NBA Departmental Coordinator,
Functional Head (Scholarship and Fees, Permanent Affiliation, Add ON Course),
Departmental File In charge (15,26,47,48)
Dr. Sachin V Mutalikdesai
Assistant Professor
Mechanical
sachin.mutalikdesai@mmit.edu.in
9960179702
Ph.D. Mechanical
Teaching experience: - 14 Yrs.
Research experience- 2 Yrs.
Industrial experience- 2 Yrs.
Investigation of Thermal Performance and Heat Transfer Characteristics of Flat Two Phase Closed Thermosyphon.
1. “Effects of Machining Parameters on Dry Turning Operation of Nickel 200 Alloy”, International Journal on Interactive Design and Manufacturing, August 2023.
2. “Performance Investigation of Elliptical Thermosyphon with Different Working Fluid and Fill Volume at Vertical Position”, Industrial Engineering Journal, Volume 52 (4) April: 2023.
3. “Experimental Investigation of an Aluminium Thermosyphon at Normal Operating Conditions”, Journal of Thermal Engineering, 6 (5), October, 2020 724-735.
4. “Effect of Mixture of Ethanol-Methanol as a Working Fluid on Heat Transfer Characteristics of Thermosyphon”, International Journal of Current Engineering and Technology, Vol. (5) June 2016.
5. “Performance Investigation of Inclined Two Phase Closed Thermosyphon by Using Binary Mixture”, Journal of Emerging Technologies and Innovative Research, Volume 3 (9), September 2016.
6. “A Review of Hydroflorocarbons (HFC’S) Refrigerants as an Alternative to R134a Refrigerant”, International Journal of Current Engineering and Technology, Vol.6 (5) Oct 2016.
7. “Performance Evaluation of Evacuated Glass Tube Solar Collector with Latent Heat Storage Material”, International Journal of Engineering Development and Research, Volume 4 (3) 2016.
8. “Determination of Surface Heat Transfer Coefficient During Quenching of Medium Carbon Steel”, International Journal of Modern Trends in Engineering and Research, Volume 03 (08) August– 2016.
9. “Optimization of Transesterification Process Using Homogeneous and Heterogeneous Catalysts for Madhuca Indica Biodiesel Derived from Triglycerides of Madhuca Indica Kernel Oil”, SAE International 2016.
10. “Performance and Emission Characteristics of CI Engine Operated On Madhuca Indica Biodiesel Using Multi-Objective Optimization By Applying Taguchi Grey Relational Analysis”, SAE International 2015.
· AICTE Training And Learning (ATAL) Academy Blended/Hybrid FDP on "Advances in Heating, Ventilation, Air-Conditioning, and Refrigeration", College of Engineering, Pune, 13th - 24th February 2023.
· FDP on "Materials & Advanced Manufacturing:, Yashoda Technical Campus, Satara, Maharashtra in association with ISTE, New Delhi, 22th - 28th August 2022.
· One Week Short Term Training Program on “Emerging Refrigerants, Trends in Refrigeration Systems Design and Development, College of Engineering”, Pune, 26th- 30th December 2017.
· Patent Lifecycle Management, Trinity College of Engineering and Research, Pune, 13th September 2014.
· NPTEL Certification Course (Refrigeration and Air Conditioning) 92 % Gold Medal (Aug 2018). Listed in top 2 % candidate.
· Qualified GATE Examination – February 2013
Life Time Member of Indian Society for Technical Education (LM 93319)
Examination Coordinator, Mini Project Coordinator
Mr. Eknath Dnyandeo Kurhe
eknath.kurhe@mmit.edu.in
9860803580
M.E. (Heat Power) PhD*
Academic Experience : 16.0 Years
Industrial Experience : 2.5 Years
Research Experience : 00
Heat Transfer, Refrigeration and Air Conditioning, Solar Energy, Energy Engineering.
1. ‘Thermal Performance Analysis of A Circular Tube Using Vortex Rings at Various Angle and Pitch Ratio’ in International journal for research in applied science and engineering technology (IJRASET). Vol. 2 Issue VIII, August 2014ISSN: 2321-9653.
2. ‘Experimental Investigation of Heat Transfer Using Inclined Vortex Rings in a Circular Tube With Varying Inclination’
International Journal For Technological Research In Engineering Volume 1, Issue 12, August-2014. ISSN
(Online) : 2347 – 4718.
3. ‘Heat Enhancement using TiO2-Nano fluid in Automotive Cooling System’ International Journal of Current Engineering and Technology E-ISSN 2277 – 4106, P-ISSN 2347 – 5161 ©2016 INPRESSCO.
· Completed 45 hours’ workshop on ADVANCED AUTOMOBILE ENGINEERING at Marathwada Mitramandal’s CIII in association with TATA Technologies.
· Attended two days workshop on ‘Industry Sponsored Project’ at MMCOE, Karvenagar, Pune.
· Attended ‘Syllabus Revision of BE Mechanical (2015 Course) on 29 Jan 2018.
· Two days online workshop on "CAE Tools and It's Application for Automotive Development" on 20th & 21st May 2020 organized by Department of Mechanical Engineering, Dr Vithalrao Vikhe Patil College of Engineering,Ahmednagar.
· Participated in One day Online Workshop On “ELECTRIC
VEHICLE–CAREER AND BUSINESS OPPORTUNITY” organised by Department of Mechanical Engineering, Anantrao Pawar College of Engineering & Research,Pune on 5/26/2020.
· Attended one week online Faculty Development Program on “OUTCOME BASED EDUCATION: A STEP TOWARDS EXCELLENCE” from 11-15 May 2020 under Margdarshan Scheme of AICTE, New Delhi.
· Participated in National Level Webinar on “Opportunities, Innovation in Renewable Energy and Sustainability” organized by the Department of Mechanical Engineering, AISSMS College of Engineering, Pune on 25th May,2020.
· attended a webinar on Fluid Power Applications and Mechatronics on 5/19/2020 organized by the Department of Mechanical Engineering, Dr. D. Y. Patil Institute of Technology, Pimpri, Pune-18 in association with Indiasoft Technologies Pvt. Ltd., Pune.
· Attended Online International Faculty Awareness Program organized by Mechanical Engineering Department, JSPM’s COE, Hadapsar Pune -028, during 11 May to 15 May 2020
Cybernetics India Pvt. Ltd, Unique Tooling Solutions Pvt. Ltd, etc.
§ ISTE Life-time Membership
§ Member, SAE India
§ Lifetime Member, International Society for Research and Development (ISRD).
§ Member, International Association of Engineers (IAENG).
Dean, Student Affairs
NAAC Criteria In-charge,
NBA Criteria 5 In-charge,
Functional Head – Anti-ragging Squad Committee, etc.
Department Portfolios: ISHARE, TG Coordinator, COE.
Dayanand Pandurang Yesane
dayanand.yesane@mmit.edu.in
110
Ph.D (Pursuing), M.E. (Design Engineering)
Academic Experience:13
Industrial Experience: 04
Research Experience: 00
Fatigue and Fracture, Automotive and Composite Materials, FEA
Total No. of National: 02
Total No. of International: 10
1. D.P.Yesane, K. Shinde, 2021: Investigation on Effects of Roll FormingParameters on Quality of Final Roll FormedProduct, International Advanced Research Journal in Science, Engineering and Technology
2. D. P. Yesane, R. Jagdale, A. Kale, 2021: Effects of Roll Diameter on aRoll Forming Product, International Advanced Research Journal in Science, Engineering and Technology
3. D.P.Yesane, Dr.R.S.Hingole 2021: Numerical Investigation of Residual Stresses in Roll Forming of Metal Sheets, International Conference on Intelligent Mechanical Systems for Industry 4.0, (ICIMSI 2021)
4. D.P.Yesane, Dr.R.S.Hingole 2016: The investigation of effects of roll forming parameters on shape defects of channel section, International Journal of Current Engineering and Technology, E-ISSN2277-4106, P-ISSN 2347-5161: 244-247
5. Sanket Khuley, Ashish Powar, Hrishikesh Joshi and D.P. Yesane 2016: International Journal of Current Engineering and Technology, E-ISSN2277-4106, P-ISSN 2347-5161: 275-280
6. Hrishikesh Joshi, Ashish Powar, Sanket Khuley and D.P.Yesane 2016: Analysis and Topological Optimization of Motorcycle Front Wheel, International Journal of Current Engineering and Technology, E-ISSN2277-4106, P-ISSN 2347-5161: 265-269
7. Ashish Powar, Hrishikesh Joshi, Sanket Khuley and D.P. Yesane 2016: Analysis and Topological Optimization of Swing-arm, International Journal of Current Engineering and Technology, E-ISSN2277-4106, P-ISSN 2347-5161: 270-274
8. Daya Yesane, Dr.R.S.Hingole 2015: Computational and experimental studies in roll forming research
9. Daya Yesane, Nilima Patil 2013: Optimization of 6-cylinder Engine Crankshaft subjected to Dynamic Loading, Vol - 1 (ISBN: 978-81-920561-2-8).
10. S.R.Valvi, V.D.Jadhav, D.P.Yesane 2014: Assessment of bioactive compounds from five wild edible fruits, Ficus racemosa, Elaegnus conferta, Grewia tillifolia, Scleichera oleosa and antidesma ghasembilla. 3(1):549-555.
11. Sujata Valvi, V. S. Rathod and D. P. Yesane 2011: Screening of three wild edible fruits for their antioxidant potential. Curr.Science.2 (1): 48-52.
12. Sujata Valvi, D. P. Yesane and V. S. Rathod 2011: Isolation of antioxidant enzymes from wild edible fruits at mature and ripened stage Curr. Science. 2(1):53-55.
1. One-week online Faculty Development Program on “Outcome Based Education: A Step Towards Excellence from 11-15 May 2020 under Margdarshan Scheme of AICTE, New Delhi
2. One Week Online Faculty Development Program on "Innovation in Teaching & Learning organized by Department of Computer Engineering from 27.04.2020 to 02.05.2020.
3. Two Week Online Refreshers Course on Advancement in Mechanical, Production and Civil Engineering and ICT in Teaching Learning Process organized by Sri Sai Ram Engineering College, Chennai from 13th -26th May 2020.
4. One Week Faculty Development Program on Funding Opportunities for Engineering Teachers and Technical Paper Writing scheduled from 15th - 19th June 2020 organized by RIT Islampur.
5. Three days online workshop on "Education 4.0 organised by IQAC, Atharva College of Engineering held on 28th - 30th April 2020.
6. Design, Simulation and Development of Unmanned Aerial Vehicles and applications in various Engineering Sectors organized by NAFEMS in association with RIT Islampur from 30th April -4th MAy 2020.
7. Two days online workshop on "CAE Tools and It's Application for Automotive Development on 20th& 21st May 2020 organized by Department of Mechanical Engineering, Dr Vithalrao Vikhe Patil College of Engineering, Ahmednagar.
8. Online Training Program on Material Characterization - Tools and Techniques conducted on 23th April to 25th April 2020 by Entuple Technologies
9. Online Webinar on Problem Based Learning organized by MMIT Pune on 20th May 2020.
10. One Day Faculty Development Workshop on “Intellectual property Rights: Issues, Challenges and New Trends” at Marathwada Mitra Mandal’s College of Commerce on 27th February 2018
11. A Joint Faculty Development Programme at MMCOE, Pune, 10th -13th December 2014
12. Attended National level faculty programme on “Advances in Product Design and Surface Engineering” Organized by Indian Institute of Metals, Pune Chapter on 18th to 22nd November 2013.
13. Completed 2-days short course on “Introduction to Noise and Vibration Control” organized by University of Southampton on 16th, 17th September 2013.
14. Attended Syllabus revision workshop for Design of Machine Elements-1, 2 organized by Pune University on 19th March 2014
15. Attended faculty Orientation Workshop on Syllabus Implementation for Design of Machine Elements-1 organized by Pune University on 7-8th July 2014.
16. Attended workshop on Syllabus Implementation for Mechanical System Design organized by Pune University on 21st December, 2015.
17. Attended 2-days workshop on Intellectual Property Rights organized by MSME Development Institute, Mumbai on 25-26th August 2016.
18. Attended workshop Syllabus Implementation for Design of Machine Elements-1 organized by Pune University on 4th January 2018.
19. Attended 3 days National Teacher’s Congress, organized by MIT on 10-12th January 2018.
Winner of Best paper award in “National Conference on Emerging Trends in Engineering and Technology - 2013” on 29th January 2013 organized by D.Y.Patil college of Engineering & Technology, Kolhapur.
Membership of Confederation of Indian Industry (CII), MCCIA
NA
· Lifetime Member, The Indian Society for Technical Education (ISTE)
Mr. Sudhir S. More
Sudhir.more@mmit.edu.in
7620086151
M. Tech. (Manufacturing) IIT Bombay
Teaching experience- 12 years
Industry :- 03 year
Six Sigma, Quality Improvement
· P Kumar, S More, R Singh, SS Joshi ,Experimental characterization of plane and conformal hydrodynamic polishing of machined single crystal sapphire, , Manufacturing Letters 1 (2-4), 70-73
· M Joshi, S More, RK Singh, SS Joshi, R Balasubramaniam, VK Suri , Experimental characterization of hydrodynamic nanopolishing of flat steel plates, Precision engineering 36 (3), 424-434
· Chinmay Dhande, Amol Bhanage, Sudhir More ,Analysis for Optimum Design of Automotive Flywheel, IJTE, Volume 46 l Special Issue l July 2023
· S More, Sachin Amte, Vishal Athawale, Suraj Jayabhaye , Design and Performance Analysis of Solar Still, , International Journal of Current Engineering and Technology, 205-208
· S More, M Darkunde, K Pawar, S Dake ,Experimental Analysis of Hydrodynamic Polishing Process, Speical issue 6, inpressco, PP141-143, 2016
· Process Optimization on EDM machines to increase Productivity, Quality and Reduced Cost, Bhanage Amol, Sudhir More, International Journal of Engineering Sciences, vol. 2, issue 2, 112-116
· Attendende FDP on “ Google -Android ” Eduskill AICTE FDP, Dec. 2023
· Completed Course on “Programming for Everybody (Getting Started with Python)”, University of Michigan , Couresra, Aug 2021
· Introduction to Data Analysis Using Excel ,“Introduction to Data Analysis Using Excel”, Rice University, Couresra,, Sept 2021
· Attended FDP on Augmented Reality (AR)/Virtual Reality(VR) organized by AICTE Training and Learning (ATAL) Academy from 17-08-2020 to 21-08-2020
· Attended FDP on “Design Thinking : AICTE Training and Learning (ATAL) Academy from 07-09-2020 to 11-09-2020
· Attended Online Training program on “Effective Educational Content Development” organized by PCCOE, Pune from 02-09-2020 to 08-09-2020
· Attended AICTE Training and Learning (ATAL) Academy Sponsored FDP on “Smart Robots” from 7 to 11 Dec 2019
· Completed 45 HrsShort term course on " Advance Manufacturing" at MCIII, Karve Nagar from Aug to Sept 2019
· Attended FDP on Product Development - Concept to Production from 7th April to 14th April 2019
· Attended STTP on NBA Accreditation from 22-04-2019 to 26-04-2019
· Attended FDP on Entrepreneurship from 17th Sept. 2018 to 25th September 2018 organized by Science and Technology Park,SPPU, Pune
· Two Days Workshop On “Student Centered Teaching – Learning Practices” on 9 and 10 October , 2017 at Sinhgad COE , Lonawala, Pune
Active member of QCFI
Academic Monitoring Coordinator, Department Time Table Coordinator, Grievance Redressal Cell Member
Mr. Naresh B. Dhamane
naresh.dhamane@mmit.edu.in
9860028501
613
M.E. Heat Power Engg.
14 Years
Thermal Engg.
1. Prof. Mathew V Karvinkoppa,Prof. Murtuza S Dholkhwala,Prof.Naresh B Dhamane,"Heat transfer enhancement using coiled wire inserts in horizontal concentric tubes", International Journal of Emerging Technology & Research, ISSN 2278 - 6082, July 2012, Pg. 1-19
2. Prof. Naresh B. Dhamane, Prof. Mathew V. Karvinkoppa, Prof. Murtuza S. Dholkhwala, "Heat transfer analysis of helical strip insert with regularly spaced cut sections placed inside a circular pipe", International Journal of Modern Engineering Research, ISSN: 2249-6645, Oct 2012, Pg. 3711-3716
3. N. B. Dhamane, Chaitanya Sanghavi, Sachin Margaje, Kasutubh Pimplay,"Optimization, stress analysis and manufacturing hard-facing machine fixture design", International Journal of Engineering Research & Technology, ISSN: 2278-0181, Nov 2013, Pg. 3640- 3645
4. N. B. Dhamane, D. B. Nalawade, M. M. Dange "Experimental study of heat transfer for wavy twisted tape insert of various pitches placed in a circular tube", International Journal of Innovative Research and Development,ISSN 2278 – 0211, Feb-2014, Pg. 141- 146
5. N. B. Dhamane, D. B. Nalawade, M. M. Dange, "Performance analysis of wavy twisted tape insert for heat transfer in a circular tube", International Journal For Technological Research In Engineering, ISSN 2347 - 4718, Feb-2014, Pg. 367-371
6. Mr. Paramveer Patil, Prof. Lalit S. Pawar, Prof. N.B. Dhamane,"Analyzing effect of varying pitch of cut corrugated twisted tape insert on augmentation of heat transfer",International Journal For Technological Research In Engineering, ISSN: 2347 - 4718, Mar-2015, Pg. 664-669
7. Prof. Murtuza S Dholkawala, Prof Mathew V.Karvinkoppa, Prof. Naresh .B.Dhamane,"Improved Triple Effect Absorption Refrigeration",International Journal of Emerging Technology & Research, ISSN 2278 - 6082, Sept 2012, Pg. 1-12
8. Naresh Dhamane, Manoj Sonawane,Yogesh Nikam, Vishal Muley, "Performance of Corrugated Copper Inserts in Heat Exchanger", International Journal of Current Engineering and Technology, E-ISSN 2277 – 4106,Oct 2016, Pg. 78-81
9. Naresh Dhamane, Sachin B. Labade, Dharam S. Maradiya,"Modification and Testing on Major Loss Apparatus by considering various Effecting Parameters", International Journal of Current Engineering and Technology, E-ISSN 2277, Oct-2016, Pg. 100-103
10. Naresh Dhamane, Mayur Jadhav, Rushikesh Jejurkar,"Augmentation of Heat Transfer using Drilled Hole & Cut Twisted Tape Inserts",International Journal of Current Engineering and Technology, E-ISSN 2277 – 4106, Oct-2016, Pg. 104-108
1. One day workshop on " FEM& CFD" at M.M.I.T.
2. One day seminar on "Energy Conservation & Auditing" at M.I.T., Kothrud
3.Syllabus Implementation Workshop On BE Mech Examiner Guidelines
4. One day workshop on "Syllabus Revision of subject design of Pumps, Blowers and Compressors" at J.S.P.M., Wagholi
5. Two Days National Level workshop on "Research Methodology" at M.M.I.T.
6. Syllabus Implementation Workshop for the subject Energy Engineering of BE Mech 2015, at Modern C.O.E., Pune
7. STTP on “NBA Accreditation”, at M.M.I.T. through NITTR
8. FDP on Intellectual Property Rights: Issues, Challenges, New Trends & Research Methodology , at M.M.I.T.
9. FDP and Course on IC Engines & Gas Turbines under NPTEL
10. Training of “LibreOffice Suite Calc”, through online mode
11. Workshop on “Introduction To Finite Element Analysis Using FEA Tool”, through online mode, conducted by AnantraoPawar College of Engineering & Research, Pune
12. FDP on “Outcome based education: a step towards Excellence”, organized by Govt. College of Engg., Karad
13. STTP on “Problem Based Learning” through Online mode
14. Seminar on “MOOCS and MOODLE, challenges opportunities in Higher Education”, organized by D.Y. Patil S.O.E., Lohgaon
15. Guest lecture series on “Quality academic research under FDP” organized by MM ShankarraoChavan Law College, Pune
16.AICTE Training And Learning (ATAL) AcademyOnline FDP on "Postharvest and Processing (Food Technology)" from 2-11-2020 to 6-11-2020 at National Institute of FoodTechnology Entrepreneurship and Management.
17. Webinar on“How to Publish Papers in High Ranking Journals?”19thSeptember 2020
18. Masterclass on “Patent Drafting” 28th November, 2020
19. Webinar on Thermodynamics using Flownex Simulation Software, 24th July, 2020
20. Awareness Webinar on Outcome Based Education and Accreditation, 27th November, 2020
21. A STTP on Advanced Applications in Artificial Intelligence and
Machine Learning
22. International Virtual Conference on Emerging Trends in Engg and Mgmt Sciences with paper on "Design and fabrication of Sugarcane Cutting Machine"
23. International Virtual Conference on Emerging Trends in Engg and Mgmt Sciences with paper on "Design of 360 degree Air Cooler"
24. Virtual National Level Faculty Development Program on “NBA Accreditation Process”
25. “One Week Online STTP/Refresher Program on Project Based Learning”
26. Entrepreneurship Program 2021
27. FDP on Zero Based Costing in Mechanical Engg
28. TE Mechanical Syllabus Implementation Workshop, Subject- Machining Science and Technology
29. “Syllabus Implementation Workshop cum faculty development program” for the subject of “Energy Audit and Management”
30. Course on Inventory Module by VM Edulife
31. 3 Days Workshop on "Stepping towards Project Based & Problem Based Learning "
32. 2 Days QIP on National Education Policy
Got Elite certificate for completing Course on I.C. Engines and Gas Turbine” through N.P.T.E.L.
1. Rudra Motors, A TATA Service center, Wagholi (Industrial Visit for Applied Thermodynamics subject)
2. Katraj Dairy, Katraj(Industrial Visit for subject Thermodynamics)
3. Ashok Tyres, Kharadi (Internship)
4. Technowings India Automation Pvt Ltd (Placements)
5. Yaan Engg. Solutions (Placements)
6. Sancheti Cold Storages, Sanaswadi (Visit of HVAC)
7. Sai Wheels and Tyres, Charholi (Visit of Skill Development)
8. PDB Engineers (Training)
9. Swami Motors, Lohgaon (Internships)
- Lifetime Member of Member of SESI,
- Lifetime Member of “International Society for Research and Development”
- Member of Institute for Engg Research & Publication
· NACC files: Students’ Association, Department Library, Development program for supporting staff, MOOCS, Mini Projects
· Audit Course coordinator for SE
· PBL Coordinator
· Department Newsletter coordinator
· MESA- Faculty Coordinator
· Dept. Library coordinator
· NAAC-Criteria-6 Incharge
· NBA-Point 10 Incharge
· Functional Head-Purchase Committee
· Functional Head-Stock Verification and Furniture Committee
· Functional Head - Students’ Progression Committee
· Member- Newsletter, Magazine, Brochure committee
· Member- QIP/AICTE/ BCUD grant committee
· Member- PBL committee
· Member- Minority Cell
· Member- MOOCS committee
· Engg Thermodynamics and Applied Thermodynamics lab in- charge
Mr. Dhananjay Manohar Bhoge
Dhananjay.bhoge@mmit.edu.in
9623633902
M.E. (Design Engineering)
Academic Experience : 12.10 yrs
Industrial Experience : 02 yrs
--
1. “Comparison of flexural joints used in precision scanning mechanism using FEA tool”, International Journal For Technological Research In Engineering, 2015
2. “Development of ‘XY’ Flexural Mechanism”, International Journal of Current Engineering and Technology, 2016 “Dynamic Analysis of XY Flexural Mechanism”, International Journal of Current Engineering and Technology, 2016
1. Two days FDP on ‘Pedagogy driven Accreditation’ at Rajarambapu Insitute of Technology, Pune, 26-28 sept.2019
2. One week online FDP on “Outcome Based Education”, Govt. College of Engineering Karad, 11-15 May 2020
3. Two days online workshop on FEA, Anantrao Pawar College of Enginering,16-17 May 2020
4. Two days online workshop on ‘CAE tool its applications for Automotive Design’ Dr. Vitthalrao Vikhe Patil College of Engineering, Ahmednagar, 20-21 May 2020
5. One day ‘FDP on learning Management System’ MMM institute of Management & Training, 16 May 2020
6. One Day University level workshop on "Changing Dimensions of Accreditation A Paradigm Shift", H.V. Desai College, Pune, 6/10/2017
7. Two days FDP on ‘MasterCAM’ MMIT, Lohgaon, Pune
8. 3 Days Workshop on "CO-PO Mapping, Justification & Attainment" 14th to 16th December 2023 MMIT Lohgaon
9. Two Days Quality Improvement Programme for Implementation of NEP on Establishment of R & D Cell in Institutions" 7h & 8h February 2023 MMIT Lohgaon
10. Three days Workshop on 'Stepping Towards Problem and Project Based Learning 20h & 22nd February 2023 MMIT Lohgaon
11. FDP on “Recent Advancement in Material, Micro-Manufacturing and Characterization (RAMMC-23)” 13th to 17th March 2023 DR. D. Y. PATIL INSTITUTE OF TECHNOLOGY, PIMPRI
12. One week Faculty Development Program on, “Zero Based Costing In Mechanical Engineering” 18th to 24th January 2022 MMIT Lohgaon
· Elite Topper: NPTEL Course on ‘Kinematics of Mechanisms and Machines’: 2019
· NA
§ Member Institue of Engineers (I)
§ Lifetime Member of Indian Society for Technical Education (ISTE)
§ Member of International Association of Engineers (IAENG)
· Lifetime Member International Society for Research and Development
· Functional Head: Lab Maintenance & write-off
· Member SDO cell
· NBA criteria 1 Incharge
· Faculty Advisor : IEI Students Chapter
Mr. Rohit P. Polas
rohit.polas@mmit.edu.in
7841982059
M. Tech (Thermal Engineering) College of Engineering, Pune
Academic Experience : 8 years 5 Months
Industrial Experience : 9 months
Research Experience : Nil
Thermal Energy, Fluid Science
1. Rohit Polas, Nikhilesh kamane, Pradyumna Dhamangaonkar, “Concentrating Volumetric Air Receiver Materials: Experimental determination of heat transfer coefficient”, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Volume-5, Issue-5, pp 6717-6733, May 2016
2. Nikhilesh kamane, Rohit Polas, Pradyumna Dhamangaonkar, “Heat and flow analysis for air through porous receiver of parabolic dish collector ”, International Journal of Engineering and Technical Research (IJETR), Volume-4, Issue-4, pp 98-101, April 2016
3. Sumeet Shah, Nikhil Wadgane, ChaitanyaPatil, Mr. R.P.Polas, “Design and Fabrication of Zero Turn Vehicle”, Journal of Gujarat Research Society, Volume 21, Issue-9,pp 286-290, November 2019
· ANSYS FLUENT 15.0: Participated in one week workshop in College of Engineering Pune.
· FMEA (FAILURE MODE EFFECT ANALYSIS) by TATA AUTOCOMP SYSTEMS PVT LTD: Participated in full day workshop to learn the application methodology of the technique in COE, Pune.
· AIR CONDITIONING AND REFRIGERATION TRENDS ARRANGED BY ISHRAE PUNE CHAPTER: Attended the conference for two days as a member of ISHRAE, covering use of energy efficient technologies in air conditioning & refrigeration field.
· STTP TECHNICAL COMMUNICATION BY IIT BOMBAY: Attended one week workshop to learn scientific communication skills at remote center IMCC, pune
· MASERCAM SOFTWARE: Attended two day workshop to learn basics of mastercam software at AISSMS COE
· SYLLABUS IMPLEMENTATION OF HEAT TRANSFER: Attended One day workshop at FLORA INSTITUTE OF TECHNOLOGY for Heat transfer subject.
· SYLLABUS IMPLEMENTATION OF REFTIGERATION & AC: Attended One day workshop at MIT, Kothrud, PuneforRefrigeration & AC subject.
· FDP on Pedagogy Driven Accreditation: Attended 3 Days FDP Organized by RIT Polytechnic, Pune
· Two Days National Seminar : Attended MOOCs & Moodle : Opportunities & Challenges National Level Seminar at D Y Patil Lohgaon Pune
· STTP by NIITTR: Attended One Week STTP on NBA Accreditation
· STTP by NIITTR: Attended One Week STTP on Laboratory Manual &Instructions
· FDP on OBE : Attended One week FDP on Outcome Based Education organised by Govt. College of Engineering Karad
· FDP on R Language: Attended One week FDP on R Programming Language organized by AISSMS & IIT B Spoken tutorials
· FDP on Latex:Attended One week FDP on Latex Programming language organized by AISSMS & IIT B Spoken tutorials
· FDP on Openfoam : Attended One week FDP on Openfoam organized by IIT B Spoken tutorials
· FDP on Moodle : Attended One week FDP on Openfoam organized by AVCOE & IIT B Spoken tutorials
· FDP on Innovative Teaching Learning Methods: Attended FDP organised by MVPS’s College of Engg.
· FDP on ADVANCES IN HVAC & R TECHNOLOGY: Attended 5 Day FDP organised by D Y Pimpri, Pune
· 3 DAY workshop on " Stepping Towards Problem and Project Based Learning: Introductory Workshop"
·
· Received Participation Certificate for Guinness World Record of SPPU for Largest Distribution of Neem Saplings at SPPU
· Received appreciation certificate for NSS Special Camp by Mr. Ashok Deshmane, Founder Snehwan organization
· Received Appreciation from BoS, Mechanical for contributing Syllabus Implementation of Turbo machinery Subject.
· LG India, Pune
· Alpha Dies & Tools Pvt Ltd
· Lashkar Water Pumping station, Pune
· Life Member of Solar Energy Society of India (SESI)
· Lifetime Member, Institute for Engineers & Research Publication (IFERP)
· Member, International Association of Engineers(IAENG)
· Associate Member of IRED
· NSS Programme Officer
· Professional Body Membership Coordinator
· Parent Teacher Meet Coordinator
· Departmental Website Coordinator
· Departmental Library Committee Coordinator
· Guardian Faculty Member
· Fluid Mechanics, Turbo Machines Lab In-charge
· NAAC Criteria 7 Member
· NBA Criteria 7 In-charge
Patil Bhuvaneshwar Dnyandeo
Bhuvaneshwar.patil@mmit.edu.in
Ph.D (Pursuing), ME (Machine Design)
Academic Experience : 14
Industrial Experience : 10
Machine Design & Vibration
Total No. of International Journal :08
Total No. of International Conference: 02
1) Three Day Online faculty Development Programme on “Fault Detection And Diagnosis Using FFT Analyzer” at ZCOER,Pune,21st June-23rd June 2021.
2) One Day Workshop on TE (2015 Course)-DME Syllabus Implementation Meet, D.Y.Patil College of Engineering, Akurdi, 04 January 2018.
3) One Day Workshop on “Syllabus Revision For The Subject Mechanical system Design”, of BE Mechanical (2015 Course),Dr.D.Y.Patil Institute of Technology,Pimpri,Pune , 20/03/2018
4) Short Term Course on “ Advanced Tools for Computational Analysis in Engineering and Technology”, Jawaharlal Darda Institute of Engineering and Technology Yavatmal , 24 Dec.2012 to 04 Jan. 2013
5) Short Term Course on “MATLAB FUND AMENTALS & APPLICATIONS”, Shri SantGadge Baba College of Engineering & Technology, Bhusaval , April 22 to 27,2013
6) One day workshop on “National Programme on Technology Enhanced Learning” , J.T.Mahajan College of Engineering, Faizpur,23rd September 2013
7) Two days National Level Workshop on “ Mechanical Vibration”,J.T.Mahajan College of Engineering, Faizpur,15-16,2012
8) Two days workshop on “Aeronautical Technology used in Aircraft”,Sandip Institute of Technology & Research Centre,Nashik.,04 & 05 March 2011
9) “Finite Element Analysis and their Engineering Applications“, STTP, SSGB COE,Bhusawal, October 25-30,2010
10) Regional Seminar on “Intellectual Property and Innovation Management in Knowledge Era”, J.T.M.College of Engineering,Faizpur, April 12-13,2010
11) One Day Workshop on “Energy Conservation and Fuel Efficiency for Engineers”,J.T.MahajanVollegeog Engineering,Faizpur,Feb.2010
12) One Day Workshop on “Energy Conservation and Fuel Efficiency for Engineers”, J.T.M.College of Engineering,Faizpur, Feb 10,2009
Life Fellow Member of Indian Institution of Industrial Engineering wef.06/10/2017
· MCIII Coordinator
Mr. Sandeep Laxman Adsure
Technical Assistant
Sandeep.adsure@mmit.edu.in
404
Diploma in Mechanical Eng.
Academic Experience : 8.0 Yrs
Industrial Experience : 07 Yrs
NAAC Departmental File 63,64,65 & 66 assist in making files
Mr.Rajesh P Dharmale
Workshop-Superintendent
rajesh.dharmale@mmit.edu.in
9623117256
MEProduction Engg, BE ProductionrEngg, DME
Teaching experience-26
Industrial Experience :.
Research Experience : 00:
Manufacturing and Automation
Total No. of International Journal : 00
Total No. of International Conference: 00
1.Two Days Training on Advance in Welding process organize “by Govt. Polytechnic Pune, on02 Feb to08 Feb 2008.
2Five days Training on Recent Trends in Electrical System of Automobils,organize by Cusrowwadia institute of techonology Pune from 12 Feb to 16 Feb 2007.
3.Two Week Industrial Training on CNC organize by INDO-GERMAN TOOL ROOM and MSBTE atAurangabad,04 Dec to 16 Dec 2006 and 10 Feb to 23 Feb 2013
4.Development of curriculumof MSBTE year 2011-2012 (Machine Desigen) & 2016-17 (Automobile Component Design).
Pune in association with Bharat Soft Solutions Pvt. Ltd., Pune.
.
· Steeping Towards Problem and Project Based Learning
Kwality Engineering, Bhosari Pune
· Lifetime Member of Institue of Engineers
Head of Workshop
Scrap committee (Functional Head)
Revenue Generation/Consultancy,
Project Lab-In charge
Dept. Labs Monitoring co-ordinator
Mr. K B WALUNJ
CAMPUS MAINTENANCE SUPERVISOR
ADMIN.
Keshav.walunj@mmit.edu.in
7350921915
409
ITI, NCTVT, MS CIT
35 Years
Conferences
Workshops
Reviewer
h-index (Scopus)
RG Score (Research Gate)
ORCID
Campus Maintenance Supervisor
Mr. Pankaj Shivajirao Thombare
Pankaj.thombare@mmit.edu.in
Diploma in Mechanical Engineering
Academic Experience : 11 Yrs
Industrial Experience : 10 Yrs
Anti Ragging committee member
Mr. Rahul Dnyaneshwar Tapkir
Instructor (Carpentery Shop)
Mechanical Engineering (Workshop)
Rahul.tapkir@mmit.edu.in
ITI. NCTVT (Carpenter)
Academic Experience : 7.3
Industrial Experience : 01
Mr. Ganesh Bhimashankar Madure
Instructor (Turning Shop)
Ganesh.madure@mmit.edu.in
ITI, NCTVT (Turner)
Academic Experience : 8
Industrial Experience : 20
Mr. Babasaheb Bhagwan Khavale
Instructor (Welding Shop)
Babasaheb.khavale@mmit.edu.in
I T I (Welder)
Academic Experience : 6
Industrial Experience : 15
* mark fields are compulsory
Powered by ChronoForms - ChronoEngine.com