Name

Dr. Amol S. Bhanage

Position

Associate Professor & Head of Department

Department

Robotics and Artificial Intelligence

Email id

This email address is being protected from spambots. You need JavaScript enabled to view it.

Cell No

+91-8482992795

Extension No

-

Qualifications 

Ph. D (Mechanical Engineering) – VIT Vellore,

M. Tech (CAD/CAM) – VIT Vellore,

B. E. (Production Engineering) – VIT Pune

Experience

14 Yrs.

Research Areas

Fatigue and Fracture, Automotive and Composite Materials, Bio composites, Finite Element Analysis

Publications

Journal Publications (SCI, Scopus):

Bhanage, A. and Krishnan, P. (2023): Sub-zero Temperature Flexural and Flexural Fatigue Behaviour of Glass Fabric /Epoxy Composite Tubular Anti Roll Bars, Composites Science and Technology, 245, 110324 (SCI, I. F. 9.1)

Bhanage, A. and Krishnan, P. (2023): Quasi-Static and Fatigue Reliability of Glass/Epoxy Composite Automotive Leaf Spring Beams Under Flexural Loads at Sub-Zero Temperatures, Journal of Failure Analysis and Prevention, 23(1), 141-156 (ESCI, Scopus)

Bhanage, A. and Krishnan, P. (2023): Sub-zero Quasi-static and Fatigue Behavior of SAE 1040 Automotive Anti-roll Bars in Flexure, SAE International Journal of Passenger Vehicle Systems, 16(2), 147-165 (ESCI, Scopus)

Bhanage, A. and Krishnan, P. (2022): Quasi-Static and Fatigue Reliability Analysis of C45 Automotive Leaf Spring Beam Under Flexural Loads in Sub-Zero Temperature, Journal of Failure Analysis and Prevention, 22(6), 2244-2259 (ESCI, Scopus)

Bhanage, A. and Krishnan, P. (2019): Numerical and Experimental Investigations on Flexural Fatigue Behaviour of Glass/Epoxy Composite and SAE 1040 Steel Tubes for Automotive Applications, SAE Technical Paper 2019-26-0317 (Scopus)

Bhanage, A., Sundge, R., and Chavan, A. (2016): Finite Element Simulation & Optimization of Steering Gear Sector Shaft Fixture Plate, International Journal of Engineering and Technology, 8(5), 2076-2084 (Scopus)

Bhanage, A. and Krishnan, P. (2015): Static and Fatigue Simulation of Automotive Anti Roll Bar Before DBTT, International Journal of Applied Engineering Research, 10(71), 472-476 (Scopus)

Bhanage, A., Krishnan, P., and Sundge, R. (2015): Static and Fatigue Simulation of Telescopic Fork Suspension System Used for Motorcycle, International Journal of Applied Engineering Research, 10(71), 477-480 (Scopus)

Bhanage, A., Satonkar, N., Sundge, R., and Nawasagare, K. (2015): Reduction of breakdown time of CO2 Welding machine through Data Analysis, International Journal of Applied Engineering Research, 10(5), 9551-9560 (Scopus)

Bhanage, A., Bedse, S., Devare, K., Batte, V., and Dixit, K. (2015): Design and Development of All Wheel Nut Remover for Automotive, International Journal of Applied Engineering Research, 10(7), 17631-17641 (Scopus)

Bhanage, A. and Krishnan, P. (2014): Design for Fatigue and Simulation of Glass Fibre/Epoxy Composite Automobile Leaf Spring, ARPN Journal of Engineering and Applied Sciences, 9(3), 196-203 (Scopus)

Bhanage, A., Satonkar, N., Deshmukh, P., and Sundge, R. (2014): Evaluation of Crashworthiness for SAE Materials under Ductile to Brittle Transition Temperature (DBTT), International Journal of Engineering and Technology, 6(5), 2129-2135 (Scopus)

Bhanage, A. (2014): Development and Automation of Loft Surface for Sheet Metal Components. International Journal of Applied Engineering Research, 9(19), 5857-5870 (Scopus)

Bhanage, A. (2014): An Overview of Flat Pattern Development (FPD) Methodologies Used in Blank Development of Sheet Metal Components of Aircraft. International Journal of Mechanical Engineering and Robotics Research, 3(2), 33-43 (Scopus)

Patil, V., Bhanage, A., and Patil, R. (2014): Analysis and Optimization of Process Parameters of Abrasive Flow Machining Process for Super Finishing of Non-Ferrous Material Nozzle, Applied Mechanics and Materials, 612, 97-104 (Scopus)

Journal Publications (Web of Science/UGC):

Bhanage, A., Sundge, R., and Chavan, A. (2016): Design Simulation Comparison of Mono Leaf Spring Using E-Glass Epoxy, Carbon Epoxy and Kelvar Epoxy Materials for Automotive Performance, Indian Journal of Science and Technology, 9 S (1), 1-7.

Journal Publications (UGC Approved):

Dhande, C., Bhanage, A., and More, S. (2023): Analysis for Optimum Design of Automotive Flywheel, Indian Journal of Technical Education, Special Issue 46, 214-218.

Journal Publications (Google Scholar):

Bhanage, A. and Krishnan, P. (2017): Fatigue and Crashworthiness of Automobile Materials after DBTT and Hygrothermal Conditioning: A Review, International Journal of ChemTech Research, 10(3), 622-635.

Bhanage, A. (2013): Design Simulation Comparison of Mono Leaf Spring Using SAE   1045 – 450– QT and E- Glass Epoxy materials for Automotive Performance, International Journal of Inventive Engineering and Sciences, 2(1), 29-33.

Book Chapters:

Bhanage, A. and Padmanabhan, K. (2023): A Comparative Study of Sub-Zero Temperature Quasi-Static and Fatigue Reliability Analysis of SAE 1040/C45 Steel and Glass/Epoxy Pipes and Beams Under Flexural Loads, in Polymer Composite Systems in Pipeline Repair: Design, Manufacture, Application, and Environmental Impacts, Gulf Professional Publishing, Elsevier, ISBN: 978-0-323-99340-1, 225-248 (Scopus)

Bhanage, A., Bait, S., and Sakhare, R. (2022): Mechanical Behaviour of Sandwich Composites in Automotive Applications, in Repair of Advanced Composites for Aerospace Applications, CRC Press, Taylor and Francis Group, ISBN: 9781003200994, 143-163.

Books:

Bhanage, A. (2023): Computer Aided Analysis, Tech Knowledge Publications

Bhanage, A. and Jadhav N. (2022): Composite Materials, Tech Knowledge Publications, ISBN :978-93-5563-306-4

Conferences

Bhanage, A. and Padmanabhan, K. (2019): Numerical and Experimental Investigations on Flexural Fatigue Behaviour of Glass/Epoxy Composite and SAE 1040 Steel Tubes for Automotive Applications, Symposium on International Automotive Technology (SIAT 2019), 16-18 Jan 2019, ARAI, Pune (Proceeding Publication in SAE Technical Papers; 2019-26-0317)

Bhanage, A., Khedkar, P., Motagi, R., More T., and Bhange, A. (2017): Design and Development of Brake Liner for Non-geared Two-wheeler Vehicle, International Conference on Manufacturing Excellence (ICMAX 2017), 3-4 March 2017, K. K. Wagh Institutes, Nashik (Proceeding Publication in ICMAX 2017)

Bhanage, A., Gharti, M., Ture, P., Jawanjal, R., and Bhamer, S. (2017): Theoretical and Analytical Study on Buckling of Hydraulic Cylinder, International Conference on Manufacturing Excellence (ICMAX 2017), 3-4 March 2017, K. K. Wagh Institutes, Nashik (Proceeding Publication in ICMAX 2017)

Bhanage, A. and Bhanage, V. (2016): Design and Modelling of 6 In 1 All-Nut Remover for Automobile Wheels, 2nd International Conference on Advances in Mechanical Engineering (ICAME 2016), 29-30 March 2016, Amrutvahini College of Engineering, Sangamner (Proceeding Publication in International Advanced Research Journal in Science, Engineering and Technology, 3(1), 33-38)

Bhanage, A., Bhange, A., and More, T. (2016): Design and Development of Blanking and Forming Die for Shock Absorber Mounting Assembly, National Conference on Product Modeling, Simulation and Manufacturing (NCPSM 2016); 9-10 Sept 2016, MMIT, Pune (Proceeding Publication in International Journal of Current Engineering and Technology; Special Issue 6)

Bhanage, A., Jawanjal, R., Bhamer, S., Ture, P., and Gharti, M. (2016): Finite Element Simulation of Oil Canning for Automotive Exterior Panels, National Conference on Product Modeling, Simulation and Manufacturing (NCPSM 2016), 9-10 Sept 2016, MMIT, Pune (Proceeding Publication in International Journal of Current Engineering and Technology; Special Issue 6)

Ture, P., Gharti, M., Jawanjal, R., Bhamer, S., and Bhanage, A. (2016): An Overview of Buckling Analysis of Cylinder Subjected to Axially Compressive Load, National Conference on Product Modeling, Simulation and Manufacturing (NCPSM 2016), 9-10 Sept 2016, MMIT, Pune (Proceeding Publication in International Journal of Current Engineering and Technology; Special Issue 6)

Meher, A., Gawhale, P., Khobare, P., and Bhanage, A. (2016): Failure Prediction of Glass Fiber Reinforced Composite Material Single Lap Joint: Finite Element Analysis. National Conference on Product Modeling, Simulation and Manufacturing (NCPSM 2016), 9-10 Sept 2016, MMIT, Pune (Proceeding Publication in International Journal of Current Engineering and Technology; Special Issue 6)

Bhanage, A., Batte, V., Bedse, S., Devare, K., and Dixit, K. (2015): Design Optimization of Sector Shaft Fixture Plate, National Conference on, Modeling, Optimization and Control, (NCMOC – 2015), 4 -6 March 2015, VIT, Pune

Bhanage, A., Patil, V., and Patil, R. (2014): A Review: Finite Element Simulation of Automotive Drive Shaft Using Composite Materials. International Conference on Science and Technology (ICST-2K14), 21- 22 Feb 2014, S. B. Patil College of Engineering, Indapur, Pune (Proceeding Publication in International Journal of Current Engineering and Technology; Special Issue 3)

Bhanage, A., More, S., Chaitanya S., and Patil, R. (2014): Process Optimization on EDM Machines to increase Material Removal Rate for Increased Productivity, Quality and Reduced Cost. International Conference on Advances in Engineering and Technology (ICAET- 2014); 1-3 Sept 2014, SKN College of Engineering, Vadgaon, Pune (Proceeding Publication in International Journal of Engineering Sciences; Issue 8)

Workshops

Workshop Attended  - 50+

Workshop Organized - 14

Reviewer

Measurement, ISSN : 0263-2241 (Elsevier) – (Scopus, WoS)

SAE International (Scopus)

Journal of Engineering Science and Technology (Scopus, WoS)

Professional Affiliations

SAE International

Indian Society for Technical Education (ISTE)

Awards & Recognitions

Best Innovative Research Work (Degree Level) by Indian Society for Technical Education (ISTE), Maharashtra and Goa Section (November 2023)

Outstanding Dean in Higher Education from Elets Education on Innovation Summit held on 10 December 2022, Pune

Secured First Rank from All Over India as Best Innovative Project at BHAU Institute of Innovation, Entrepreneurship & Leadership, COEP Pune

h-index (Scopus)

4

RG Score (Research Gate)

303.5

ORCID

·         https://orcid.org/0000-0002-5626-3307

·          

Industry Connect

Hab Biomass Pvt. Ltd., Pune

CPS India Pvt. Ltd., Pune

N. B. Technologies, Pune

Helix Integrated Pvt. Ltd., Pune

Naissance Pvt. Ltd., Pune

Shrreji Marketing Co., Pune

Alfa Advanced Composite Technology, Pune

Indicarbon Composite, Mumbai

ImpactGuru, Delhi

EQUIP9, Pune

Naissance Pvt. Ltd., Pune

Techartisan 3D Solution, Pune

HubCity, Pune

Funded Projects

NA

Responsibilities @MMIT

Head of Department – Robotics and Artificial Intelligence

Dean – Research & Industry Relations

President – Institution Innovation Cell

SPPU – Academic and Research Coordinator (ARC)

Functional Head – R&D and IPR Cell

NBA Criteria II In charge